Shure SLX14 UHF Agile Guitar Wireless System

Shure Quality Combined with Today's Latest Technology!

Nothing gives you more freedom than a Shure wireless kit. Made from the highest quality components to ensure that your signal will not be lost during a performance.

SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Features

• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs

System Includes:

WA302 Instrument Cable
Instrument cable connects the T1, UT1, SC1, LX1, ULX1, UC1 and U1 body-pack transmitter to a guitar or other instrument. Features a 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems).

WA303 Guitar Cable
2-foot (0.6 m) standard guitar cable with 1/4-inch connector on each end, for use with T1G bodypack transmitter.

SLX1 Bodypack Transmitter
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

SLX4 Wireless Receiver
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Technical Description

Overall System
Operating Range Under Typical Conditions: 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference

Audio Frequency Response (+/– 2 dB):

• Minimum: 45 Hz
• Maximum: 15 kHz

Total Harmonic Distortion (ref. +/– 38 kHz deviation, 1 kHz tone): 0.5%, typical

Signal-to-Noise Ratio: >100 dB A-weighted

Operating Temperature Range: –18°C (0°F) to +50°C (+122°F)

Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.

SLX1 Bodypack Transmitter

Audio Input Level: +10 dBV maximum at 0 dB gain position

Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight: 81 grams (3 oz.) without batteries

Housing: Molded ABS case

Power: 2 “AA” size alkaline or rechargeable batteries

Battery Life: >8 hours (alkaline)

SLX2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at minimum gain position

Dimensions (including SM58 cartridge): 254 mm x 51 mm dia. (10 x 2 in.)

Weight: 290 grams (10.2 oz.) without batteries

Housing: Molded PC/ABS handle and battery cup

Power: 2 “AA” size alkaline or rechargeable batteries

Battery Life: >8 hours (alkaline)

SLX4 Receiver
Dimensions: 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight: 816 g (1 lb. 13 oz.)

Housing: Galvanized steel

Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)

• XLR connector (into 600 ohm load): –13 dBV
• 1/4 inch connector (into 3000 ohm load): –2 dBV

Output Impedance:

• XLR connector: 200 ohms
• 1/4 inch connector: 1kohm

XLR output:

• Impedance balanced
• Pin 1: Ground
• Pin 2: (+)
• Pin 3: (-)

Sensitivity: –105 dBm for 12 dB SINAD, typical

Image Rejection: >70 dB, typical

Power: 12–18 Vdc at 150 mA, supplied by external power supply

Warranty Information

2-year limited warranty on microphones.