Yamaha Stage PAS500 Portable PA System

Introducing the STAGEPAS 500, available for situations in which a little extra power and channel capacity is needed!

The basics from the STAGEPAS 300 are also found in the new 500: incredibly lightweight, portable, easy-to-use PA system consisting of a pair of high-performance speakers with a built-in powered mixer. You can be set up and playing in a matter of minutes, and then packed away and on the road again with the same ease and speed when youre done. And all of this is provided with no compromise in sound quality or versatility, plus some advanced features you normally wouldn't expect to find in systems in this class. Whichever system you choose, you have a high-performance live-sound system that will deliver your music or message wherever you go, indoors or out.

Features

• Two 2-Way, top-quality passive speakers: 10 woofers and 1 high-frequency units provides clean, high-quality sound.
• Detachable 10-channel 250W + 250W STAGEPAS 500 powered mixer: can be used either while installed in the speaker compartment or detached for easy positioning and access.
• Two-band EQ and Reverb built in.
• Convenient accessory compartment: store cables, mics, & small necessities.
• Pair of speaker cables.

10 Channels and 250W + 250W Power for More Sources and Larger Venues

Dual 250-Watt amplifiers Two 250-watt power amplifiers can fill surprisingly large clubs or rooms, or project your sound over a considerable distance outdoors. The class-D power amplifier has been painstakingly designed to deliver superior sound quality as well as reliability in a remarkably compact unit.

Versatile 10-channel Mixer with Monitor and Record Outputs If there are more members in your band than the STAGEPAS 300s 8 input channels can handle, or you simply have a lot of sources to mix, the STAGEPAS 500 gives you 10 input channels in all: four mono microphone/line inputs and three stereo line inputs. The additional stereo channel can used for either a stereo or mono source. In addition to the main speaker outputs the mixer has line outputs that can be used to connect additional powered speakers for monitoring, and to send the mixer's output to a recording device.

Phantom Power for Highperformance Condenser Microphones The STAGEPAS 500 mixer features switchable phantom power for the four microphone/line inputs. This lets you use high-performance phantom-powered condenser microphones in situations where you want the extended, natural response they provide. Built-in Channel Compression/Limiting

Built-in Channel Compression/Limiting Channels 1 and 2 feature LIMIT/COMP switches that let you apply either limiting or compression to those channels. Limiting can be useful to prevent input overload and distortion with sources that have a wide dynamic range, while compression can add punch to vocals, bass, guitar, and other sources while smoothing out the sound and helping it to ride better in the mix.

2-band Channel EQ and Reverb Like the STAGEPAS 300 mixer, the STAGEPAS 500 mixer has 2-band EQ controls on each channel, as well as REVERB switches on channels 1 through 4. A separate REVERB level control adjusts the reverb mix.

Additional Features

• XLR and phone-jack inputs on mono channels, and phone-jack and RCA pin- jack inputs on stereo channels allow connection to a wide range of sources.
• MIC/LINE switches select microphone or line level input matching for channels 1 through 4.
• Auto Limiter prevents overload damage to power amplifier and speakers.
• LED output level meter.
• Speaker cables supplied.
• Optional BMS-10A Mic Stand Adaptor for the mixer unit.
• The STAGEPAS 500 speakers can be stand mounted without standard speaker stand adapters.

Technical Description

Output Power (Maximum):
250 W + 250 W (10 %)/4ohm @ 10 % THD at 1 kHz (SPEAKERS L/R)

Output Power (RMS):
200 W + 200 W/4ohm @ 1 % THD at 1 kHz (SPEAKERS L/R)

Maximum Output Level:
116 dB (1 m)

Frequency Response: (Nomimal output level @ 1 kHz)

• -3 dB, 0 dB, +1 dB @ 20 Hz-20 kHz
  (MUSIC/SPEECH=MUSIC) (MONITOR OUT)
  
  
• -3 dB, 0 dB, +1 dB @ 80 Hz-20 kHz
  (MUSIC/SPEECH = SPEECH) (REC OUT)
  
  
• -3dB, 0dB, +1 dB @ 20 Hz-20 kHz, 1 W Output
  (MUSIC/SPEECH=MUSIC, without Speaker EQ) (SPEAKERS L/R)

Total Harmonic Distortion:
=/< 0.5 % @ 20 Hz, 1 kHz, 20 kHz +14 dBu GAIN = nominal (MONITOR OUT, REC OUT)

Hum & Noise: (Equivalent Input Noise, Rs = 150ohm, MIC/LINE = MIC)

• =/< -106 dBu (CH1/2)
• =/< -112 dBu (CH3/4)
• =/< -65 dBu Residual output noise (SPEAKERS L/R)

Crosstalk (1 kHz):
=/< -70 dB between input channels

Power Consumption:
65 W

Phantom power Switch:
ON / OFF (CH1-4)

LIMIT/COMP Switch:
ON = Comp, OFF = Limit (CH1/2)

Input Channel Equalization:

• +/- 15 dB
• HIGH 10 kHz shelving
• LOW 100 Hz shelving

Enclosure:
2 way bass-reflex type, Polypropylene, Black

Crossover Frequency:
4.0 kHz (LF: 12 dB/oct, HF: 12 dB/oct)

Frequency Range:
55 Hz-20 kHz (-10 dB)

Speaker Unit:

• LF: 10" (25 cm) Cone
• HF: 1" (2.54cm) Compression Driver

Weight:
52.9 lb. (Speaker x 2 + Powered Mixer)

Dimensions: (W x H x D inches)
13.5 x 21.5 x 11.7 (speaker x 1)
330 x 12 x 175 (Mixer)

Warranty Information

3-year limited warranty on parts and labor for digital pianos. 1-year warranty on parts and labor on Yamaha pro audio and electric guitars. Power amps and speakers carry a 3-year warranty on parts and labor. Acoustic guitars carry a limited lifetime warranty, PSR keyboards and electronic drums carry a 1-year warranty on parts and 90 day warranty on labor.