Pressurizer Compressor/Booster Pedal Bundle

Bundle Information
Products in this bundle:

  • PressuRizer Compressor Booster Compression Pedal
    1x PressuRizer Compressor Booster Compression Pedal
    SKU: AMPTPRESSURIZE
    Sustain without compression - a common suggestion Amptweaker receives that means "don't mess with my attack." The Amptweaker PressuRizer compressor accomplishes this in several unique ways, and includes a built-in output FET limiter/booster, making this a powerful clean tone tweaker. Using parallel studio-grade compression with wet/dry blend, and some unusual side-chain variations, it varies from smooth compression that limits the initial 'whack' to a dry-blended approach that adds compression after a short delay. The PressuRizer is designed to work for both guitar and bass.The Bloom switch (Fast/Off/Slow) rewires the side-chain detector so the signal compresses and then grows - when blended with dry, the result sounds normal at first, and then blooms like a great Les Paul. The Tone only affects the compressed signal and boosts highs to cut through, or cuts midrange to help match the 'blooming' tone to the dry. The Limiter switch adds a FET booster after the blend, and can be set Soft for barely limiting, Hard for a slightly broken-up sound, or Off for no limiting. This FET limiter has a very rounded breakup, similar to output tubes.Since many always leave their compressor on, the PressuRizer has a cool 2-Step footswitch - normally it's a true bypass on/off switch, but if you press & hold the switch, it locks the compressor on, and then tapping kicks in another boost knob on the side of the pedal. So you can get a 1-2 punch with a single button pedal!https://www.youtube.com/watch?v=bO00wRBycow
  • 6
    2x 6" Instrument Patch Cable
    SKU: STRU6IN
    Stukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • 6mm Rubber Instrument Cable
    1x 6mm Rubber Instrument Cable
    SKU: STRUSC10R
    Strukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, they use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • GearTree Cloth

Product Information

Sustain without compression - a common suggestion Amptweaker receives that means "don't mess with my attack." The Amptweaker PressuRizer compressor accomplishes this in several unique ways, and includes a built-in output FET limiter/booster, making this a powerful clean tone tweaker. Using parallel studio-grade compression with wet/dry blend, and some unusual side-chain variations, it varies from smooth compression that limits the initial 'whack' to a dry-blended approach that adds compression after a short delay. The PressuRizer is designed to work for both guitar and bass.

The Bloom switch (Fast/Off/Slow) rewires the side-chain detector so the signal compresses and then grows - when blended with dry, the result sounds normal at first, and then blooms like a great Les Paul. The Tone only affects the compressed signal and boosts highs to cut through, or cuts midrange to help match the 'blooming' tone to the dry. The Limiter switch adds a FET booster after the blend, and can be set Soft for barely limiting, Hard for a slightly broken-up sound, or Off for no limiting. This FET limiter has a very rounded breakup, similar to output tubes.

Since many always leave their compressor on, the PressuRizer has a cool 2-Step footswitch - normally it's a true bypass on/off switch, but if you press & hold the switch, it locks the compressor on, and then tapping kicks in another boost knob on the side of the pedal. So you can get a 1-2 punch with a single button pedal!

Product Features

  • Bloom switch sets compression swell to Fast/Off/Slow
  • FET output Limiter/booster with Soft/Off/Hard settings
  • Press & Hold footswitch to access extra Boost knob
  • Runs on 9V to 18V batteries or supplies - 9V provides harder FET limiting, while 18V is more open and less distorted, and provides more dramatic compression.
  • Sustain, Tone, Master Volume controls
  • Thumbscrew removable bottom with holes for tie-wrap or screw-in pedalboard attachment methods
  • Tone boosts highs or cuts mids of the compression
  • True Bypass switching
  • Wet/Dry Blend control to help preserve attack

Product Specifications

Brand
Amptweaker
SKU
XAMPTPRESSURIZE
Age
All Ages
Gender
Unisex
MPN
PRESSURIZE
Effect Type
Boost
UPC
607595972899
Input
Mono
Ship Dimension
7 x 10 x 6 inches
Ship Weight
1.8lbs.