CK1 Multi-Capsule Microphone w/Cloth and Cable

Bundle Information
Products in this bundle:

  • CK1 Small-Capsule FET Pencil Microphone
    1x CK1 Small-Capsule FET Pencil Microphone
    SKU: AVANCK1
    The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET micsbut at a fraction of their cost!The CK-1 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modder/hot-rodders!The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion mikingIt exudes class visually as well as sonically. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano.The CK-1 includes (3) 19mm (3/4") interchangeable capsules to provide unlimited miking possibilities! Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The rugged CK-1 mic is able to produce professional results with a clean sonic character.The CK-1 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.*Included Items*Avantone CK-1 FET MicrophoneAvantone SSM ShockmountElegant padded genuine wooden Mic box19mm Cardioid, Omni, and Hyper-Cardioid capsulesOwners Manual
  • SMC20 20' XLR Microphone Cable
    1x SMC20 20' XLR Microphone Cable
    SKU: STRUSMC20
    We selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • GearTree Cloth

Product Information

The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics, but at a fraction of their cost!

Avantone's rugged CK-1 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly.

The CK-1 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents their commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modder/hot-rodders!

The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion miking. It exudes class visually as well as sonically. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano.

The CK-1 includes (3) 19mm (3/4") interchangeable capsules to provide unlimited miking possibilities! Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The rugged CK-1 mic is able to produce professional results with a clean sonic character.

The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 capsules (cardioid, omni, and Hyper-cardioid) offer versatility for accommodating virtually any miking task.

The CK-1 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Included Items
Avantone CK-1 FET Microphone
Avantone SSM Shockmount
Elegant padded genuine wooden Mic box
19mm Cardioid, Omni, and Hyper-Cardioid capsules
Owners Manual

Product Features

  • Capsule: Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)
  • Frequency Response: 25-20,000 Hz +/- 3dB
  • Maximum SPL: 138dB (0.5% THD @1000Hz)
  • Output Impedance: <=200 Ohms
  • Polar Pattern(s): Cardioid , Hyper-Cardioid & Omni Capsules included
  • Power Requirement: Standard 48 Volt Phantom / 5mA
  • Sensitivity: 15mv/pa
  • Type: True Condenser

Product Specifications

Brand
Avantone Pro
SKU
XAVANCK1
Age
All Ages
Gender
Unisex
MPN
CK1
UPC
607595972721
Connector
XLR
Polar Pattern
Cardioid
Diaphragm Size
Small (Up to 16mm)
Max SPL
130dB to 140dB
Switch
No
Ship Dimension
12 x 12 x 8 inches
Ship Weight
4.3lbs.