• FB-3 FatBoost 3 Clean Boost Pedal Bundle
  • FB-3 FatBoost 3 Clean Boost Pedal Bundle
FB-3 FatBoost 3 Clean Boost Pedal Bundle

Bundle Information
Products in this bundle:

  • FB-3 FAT-BOOST 3 Clean Boost Pedal
    1x FB-3 FAT-BOOST 3 Clean Boost Pedal
    SKU: FULLFB3
    The Fulltone FatBoost 3 is a discrete, Class-A, FET (Field-Effect-Transistor) guitar pedal offering up to 35dB of non-distorted gain without changing your signature sound, unless you want that. You can fatten/distort your tone, brighten or mellow up the sound, add or subtract bass, and even add harmonics. The FB-3 has true-bypass switching (via the Fulltone 3PDT) and incorporates a super-bright LED without the loud popping sound thanks to Fulltone's proprietary anti-pop circuitry. FET's can behave like tubes in a properly designed circuit. They can clip (distort) in a pleasing way instead of being buzzy or spiky-sounding (like a transistor) and can also add a subtle limiting to the signal which can even out the volume making your live and recorded tones more pleasing to the ear. If you're a recording engineer, you'll be happy to know you can use the Fulltone FatBoost 3 on everything from acoustic and electric guitar to electric bass, and even snare drums.The FatBoost 3 pedal works great in front of non-Master Volume tube amps to goose them into submission, as well as through Master Volume amps to drive them much harder than possible with just your guitar alone. It also works very well on bass, acoustic guitars (with pickups), and is ideal at the end of a pedalboard effects chain to completely eliminate the tone loss caused by long guitar cable runs back to your amp. Doing so will allow the use of 50' (or longer) cable lengths with no signal degradation whatsoever.
  • 6
    2x 6" Instrument Patch Cable
    SKU: STRU6IN
    Stukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.

Product Information

The Fulltone FatBoost 3 is a discrete, Class-A, FET (Field-Effect-Transistor) guitar pedal offering up to 35dB of non-distorted gain without changing your signature sound, unless you want that. You can fatten/distort your tone, brighten or mellow up the sound, add or subtract bass, and even add harmonics. The FB-3 has true-bypass switching (via the Fulltone 3PDT) and incorporates a super-bright LED without the loud popping sound thanks to Fulltone's proprietary anti-pop circuitry.

FET's can behave like tubes in a properly designed circuit. They can clip (distort) in a pleasing way instead of being buzzy or spiky-sounding (like a transistor) and can also add a subtle limiting to the signal which can even out the volume making your live and recorded tones more pleasing to the ear. If you're a recording engineer, you'll be happy to know you can use the Fulltone FatBoost 3 on everything from acoustic and electric guitar to electric bass, and even snare drums.

The FatBoost 3 pedal works great in front of non-Master Volume tube amps to goose them into submission, as well as through Master Volume amps to drive them much harder than possible with just your guitar alone. It also works very well on bass, acoustic guitars (with pickups), and is ideal at the end of a pedalboard effects chain to completely eliminate the tone loss caused by long guitar cable runs back to your amp. Doing so will allow the use of 50' (or longer) cable lengths with no signal degradation whatsoever.

Product Features

  • A huge amount of headroom before clipping of any pedal you've tried
  • Class-A , 100 percent JFET powered, with no op amps
  • Multi-stage FET design provides great compression
  • Non-inverting and extremely Low-Z output to drive other pedals and long cables
  • Offers a bit of Tweed-style crunch tone with Drive control turned up, but excels as clean booster
  • Pre-clipping Bass control (keeps things from getting flabby when using neck pickup
  • Proprietary power section allows you to use just about any power supply
  • Total redesign of Fulltone''s Fat-Boost pedal
  • Treble control allows lots of sparkle yet can brown up nicely
  • True bypass, bright LED, and anti-pop switching circuitry

Product Specifications

Brand
Fulltone
SKU
XFULLFB3
Gender
Unisex
Age
All Ages
UPC
799928926201
MPN
FB3
Effect Type
Boost
Input
Mono
Ship Dimension
7.8 x 5.5 x 10.5 inches
Ship Weight
2lbs.