• Orange Getaway Driver '70s Amp-in-a-Box Overdrive
  • Orange Getaway Driver '70s Amp-in-a-Box Overdrive
  • Orange Getaway Driver '70s Amp-in-a-Box Overdrive
  • Orange Getaway Driver '70s Amp-in-a-Box Overdrive
Orange Getaway Driver '70s Amp-in-a-Box Overdrive

Bundle Information
Products in this bundle:

  • Getaway Driver '70s Amp-in-a-Box Overdrive Pedal
    1x Getaway Driver '70s Amp-in-a-Box Overdrive Pedal
    SKU: ORANGD
    The Getaway Driver is an amp-in-a-box type pedal with just three dials - Volume, Bite (tone) and Gain. While the pedal adds its vintage vibe on all amplifiers, it really excels when used with the amplifiers clean channel, even ones with a bright cap. It also makes a great clean boost, with low Gain and high Volume pushing amps over the edge into classic overdrive.The gain structure is produced using single-ended JFET circuitry running in Class A, just like a valve amp. The input buffer, output buffer and Cab Sim are handled using op-amps, using a charge pump to give 18v of headroom.The pedal features the same transparent, buffered output used on the Orange Two Stroke and Kongpressor pedals. While the second output is a buffered Cab Sim/headphone amp which can also work into a PA (via a DI box) or directly into a recording interface. The first output is transparent when bypassed, however, when using the second output, the Cab Sim remains engaged. This means that the Getaway Driver can be used as just a Cab Sim on its own if needed.The voicing and gain structure of this pedal is based on a cranked modded 70s valve amp. Running at 9 Volts, the pedal will have the character of EL84 valves, whereas 12 Volts will give an EL34 flavour. Use a regulated 9-12V DC centre-negative power supply.
  • 6
    2x 6" Instrument Patch Cable
    SKU: STRU6IN
    Stukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • 6mm Rubber Instrument Cable
    1x 6mm Rubber Instrument Cable
    SKU: STRUSC10R
    Strukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, they use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • Microfiber Instrument Polish Cloth
    1x Microfiber Instrument Polish Cloth
    SKU: GEARCLOTH
    Keep your instrument collection clean and free of dust, smudges and other day-to-day blems with this microfiber polishing cloth. For use on guitars, basses, drums and any other instruments that need upkeep.

Product Information

The Getaway Driver is an amp-in-a-box type pedal with just three dials - Volume, Bite (tone) and Gain. While the pedal adds its vintage vibe on all amplifiers, it really excels when used with the amplifiers clean channel, even ones with a bright cap. It also makes a great clean boost, with low Gain and high Volume pushing amps over the edge into classic overdrive.

The gain structure is produced using single-ended JFET circuitry running in Class A, just like a valve amp. The input buffer, output buffer and Cab Sim are handled using op-amps, using a charge pump to give 18v of headroom.

The pedal features the same transparent, buffered output used on the Orange Two Stroke and Kongpressor pedals. While the second output is a buffered Cab Sim/headphone amp which can also work into a PA (via a DI box) or directly into a recording interface. The first output is transparent when bypassed, however, when using the second output, the Cab Sim remains engaged. This means that the Getaway Driver can be used as just a Cab Sim on its own if needed.

The voicing and gain structure of this pedal is based on a cranked modded 70s valve amp. Running at 9 Volts, the pedal will have the character of EL84 valves, whereas 12 Volts will give an EL34 flavour. Use a regulated 9-12V DC centre-negative power supply.

Product Features

  • CAB SIM OUTPUT
  • Internal Button - Theres a button inside the getaway driver that when pushed in, tames the top end to make it better for clean channels with treble bleed caps on the volume

Product Specifications

Brand
Orange
SKU
XORANGD
Age
All Ages
Gender
Unisex
MPN
GD
UPC
669818848589
Ship Dimension
20 x 45 x 6 inches
Ship Weight
4.3lbs.