Origin Effects RevivalDrive Custom Overdrive Pedal

Bundle Information
Products in this bundle:

  • Origin Effects RevivalDrive Custom Overdrive Pedal
    1x Origin Effects RevivalDrive Custom Overdrive Pedal
    SKU: ORIGRDCTMEQ
    Housing an unabridged valve amp-style signal path recreated in analogue electronics, the RevivalDRIVE accurately delivers a wide range of British and American amp tones, from clean to fully cranked.With valve and silicon rectifier channels, a built-in mid boost and unique controls that will tailor its output to the amp youre using, this may be the last overdrive pedal you will ever need.When it comes to overdrive, nothing comes close to the sound of a vintage non-master-volume valve amp. So when we set out to design the RevivalDRIVE, we began by looking not at other pedals but at amps.We listened to and analysed countless classic amps to figure what made them sound so good. Then we figured out how to reproduce not just one but all of those sounds in a pedal, with controls that would allow the player to precisely dial in each one – or to mix and match different elements to create something new.With the Cali76 compressor, we took the sound and response of the legendary Urei 1176 studio compressor and reproduced it in a pedal, following the same analogue circuit topology but adapting the components to work in pedal format. Weve applied exactly the same approach to the RevivalDRIVE.Using all-analogue components and replacing the valves with discrete transistor-based circuitry, were recreated every stage of the signal path youd find inside a vintage valve amp. This includes not only the preamp, phase inverter, power amp and rectifier stages, but also a synthesised mains power signal and a speaker-emulating reactive load.Accurately emulating valve amp circuit behaviour is just the start. The RevivalDRIVEs intuitive controls let you play around with different elements of this circuit, effectively redesigning the amp as you go.Change the preamp voicing and bright capacitor values to explore a range of British and American amp flavours. Rein in the low end for a lean and defined overdrive or push the bass into brutal distortion. Fine-tune the overdrives response to your picking dynamics. Goose up your tone with a mid boost, adjusted to just the right frequency, or blend your dry and overdriven signals together.One pedal, many amps, your tone!
  • 6
    2x 6" Instrument Patch Cable
    SKU: STRU6IN
    Stukture selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • Microfiber Instrument Polish Cloth
    1x Microfiber Instrument Polish Cloth
    SKU: GEARCLOTH
    Keep your instrument collection clean and free of dust, smudges and other day-to-day blems with this microfiber polishing cloth. For use on guitars, basses, drums and any other instruments that need upkeep.

Product Information

Housing an unabridged valve amp-style signal path recreated in analogue electronics, the RevivalDRIVE accurately delivers a wide range of British and American amp tones, from clean to fully cranked.
With valve and silicon rectifier channels, a built-in mid boost and unique controls that will tailor its output to the amp youre using, this may be the last overdrive pedal you will ever need.When it comes to overdrive, nothing comes close to the sound of a vintage non-master-volume valve amp. So when we set out to design the RevivalDRIVE, we began by looking not at other pedals but at amps.

We listened to and analysed countless classic amps to figure what made them sound so good. Then we figured out how to reproduce not just one but all of those sounds in a pedal, with controls that would allow the player to precisely dial in each one or to mix and match different elements to create something new.With the Cali76 compressor, we took the sound and response of the legendary Urei 1176 studio compressor and reproduced it in a pedal, following the same analogue circuit topology but adapting the components to work in pedal format. Weve applied exactly the same approach to the RevivalDRIVE.

Using all-analogue components and replacing the valves with discrete transistor-based circuitry, were recreated every stage of the signal path youd find inside a vintage valve amp. This includes not only the preamp, phase inverter, power amp and rectifier stages, but also a synthesised mains power signal and a speaker-emulating reactive load.Accurately emulating valve amp circuit behaviour is just the start. The RevivalDRIVEs intuitive controls let you play around with different elements of this circuit, effectively redesigning the amp as you go.

Change the preamp voicing and bright capacitor values to explore a range of British and American amp flavours. Rein in the low end for a lean and defined overdrive or push the bass into brutal distortion. Fine-tune the overdrives response to your picking dynamics. Goose up your tone with a mid boost, adjusted to just the right frequency, or blend your dry and overdriven signals together.

One pedal, many amps, your tone!

Product Features

  • Advanced power supply filtering and protection
  • Built-in reactive speaker load
  • Dry/O.D. blend control
  • Dual Class-A preamp stages
  • Fully variable mid boost
  • High-current, low-noise electronics
  • High-quality signal-conditioning bypass mode
  • Phase inverter and push-pull power amp stages
  • Powerful re-amp EQ
  • Preamp and bright cap voicing switches
  • Premium components throughout
  • Silent switching
  • Solid-state and valve-styled rectifier channels
  • Ultra-high input impedance

Product Specifications

Brand
Origin Effects
SKU
XORIGRDCTMEQ
Age
All Ages
Gender
Unisex
MPN
RDCTMEQ
UPC
768563719189
Ship Dimension
7 x 6 x 10 inches
Ship Weight
3lbs.