• WA-47jr FET Condenser Microphone w/Shockmount
  • WA-47jr FET Condenser Microphone w/Shockmount
WA-47jr FET Condenser Microphone w/Shockmount

Product Information

The WA-47jr proudly utilizes a custom k47 style capsule reproduction, designed with the same hole pattern and frequency response as the vintage design. Our version of this capsule (model# WA-47-B-80v) is carefully manufactured by an Australian capsule manufacturer with careful precision and repeat-ability that allows the most important sonic piece of the classic mic to be heard and influence the tone and signature of the WA-47jr. The WA47jr's low-noise and discrete signal path, when paired with this excellent true '47 style capsule, allows it to obtain a very similar tone to the classic 47 microphone, but at a much lower price tag. The WA-47jr utilizes the same k47 style capsule found in the flagship WA-47 tube condenser microphone.

The WA-47jr proudly utilizes a custom k47 style capsule reproduction, designed with the same hole pattern and frequency response as the vintage part. Our version of this capsule (model# WA-47-B-80v) is carefully manufactured by an Australian capsule manufacturer with careful precision and repeat-ability. The WA47jr's low-noise and discrete signal path then paired with an excellent true '47 style capsule allows this mic to obtain a very similar tone to the classic 47 microphone at a much lower price tag.

Includes: Shockmount, hardmount, zipper storage pouch

Product Features

  • 3-Pin Gold-Plated XLR
  • 48v phantom powered
  • Capsule makeup: Gold sputtered, dual large diaphragm, single backplate, 6 microns NOS mylar (PET film).
  • Custom true '47 capsule reproduction (k47 style) - Model# WA-47-B-80v.
  • Dynamic range: 138dBA
  • Dynamic Range: 138dBA (IEC651)
  • Equivalent Noise: 9dBA (IEC651)
  • FET transformerless '47 style condenser microphone.
  • Frequency Range: 20 Hz~20 kHz
  • Fully discrete signal path, Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors.
  • High-pass filter: 70Hz
  • Maximum output: 16dBu @1kHz, 1kOhms, 0.5% THD
  • Maximum SPL: 147/157dB (@1kHz 1kOhms 0.5% THD, 0/-10dB)
  • Nickel Plated
  • Output Impedance: 100 ohms
  • Pad: -10db
  • Polar Patterns: Cardioid, figure-of-eight, and omnidirectional.
  • Rated Load Impedance: =1kOhms
  • S/N Ratio: 85dBA (IEC651)
  • Self-noise: 9dBA
  • Sensitivity: 10mV/Pa or -40dB

Product Specifications

Brand
Warm Audio
SKU
WARMWA47JR
MPN
WA47JR
UPC
713541493124
Connector
XLR
Polar Pattern
Multi-pattern
Diaphragm Size
Large (19mm and up)
Max SPL
140dB to 150dB
Switch
No
Ship Dimension
12 x 12 x 8 inches
Ship Weight
4.7lbs.