EMX2 10-Channel 2x250W Powered Mixer Bundle

Bundle Information
Products in this bundle:

  • EMX2 10-Channel 2 x 250-Watt Powered Mixer
    1x EMX2 10-Channel 2 x 250-Watt Powered Mixer
    SKU: YAMAEMX2
    Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.
  • SMC20 20' XLR Microphone Cable
    2x SMC20 20' XLR Microphone Cable
    SKU: STRUSMC20
    We selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on.
  • PV 7 ND Magnet Dynamic Microphone with XLR Cable
    2x PV 7 ND Magnet Dynamic Microphone with XLR Cable
    SKU: PEAV03013490
    The Peavey PV 7 Microphone features an ND magnet diaphragm and has high sensitivity. This microphone comes with a XLR to XLR 16.4' (5m) mic cable and is portable to any event or occasion. Equipped with a carrying case for the microphone, you can be sure this will arrive and leave in good condition.

Product Information

Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.

Despite being a mixer and an amplifier in a single unit, the EMX2's dimensions (37.5cm x 22cm x 15cm / 14.8" x 5.8" x 8.7") are surprisingly modest, making it easy to fit along with speakers even in the trunk of a small car. The lightweight body also features handles for a superior level of portability that will benefit anyone setting up a PA for applications where time is a consideration.

Product Features

  • 4 Yamaha Reverbs for Additional Atmosphere
  • A Positive Feedback Feature
  • Flexible Setupfor a Diverse Range of Applications
  • Microphone and Cables included!
  • Premium Portability

Technical Specifications

  • I/O
  • TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3
  • Phantom Power: CH1, 2 : +30 V
  • Outputs: SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT
  • Control: FOOT SW : Effect Mute on/off
  • Bus: Stereo: 1, Effect: 1
  • Input Channel Function
  • PAD: 26 dB (CH1-4)
  • Hi-Z: Supported (CH4)
  • EQ High: 8kHz +15dB / -15dB
  • EQ Mid: 2.5kHz +15dB / -15dB
  • EQ Low: 100Hz +15dB / -15dB
  • On-Board Processors: SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
  • Maximum Output Power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
  • Maximum Output Power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
  • Level Meter: 6points (-20, -6, 0 , +3, +6, LIMITER)

Product Specifications

Brand
Yamaha
SKU
XYAMAEMX2
Age
All Ages
Gender
Unisex
UPC
682500023118
Effects
No
Number of Channels
10
Number of Mic Inputs
4
Power
100W to 300W
Rackmountable
Yes
Ship Dimension
18 x 12 x 12 inches
Ship Weight
15lbs.